ASR-020D AsReader 2D Barcode Scanner
| Model Name | ASR-020D | |
|---|---|---|
| Barcode | Scan Engine | 2D CMOS |
| Minimum Resolution | 0.102mm~0.508mm (4mil~20mil) | |
| Reading distance | 50～760mm(1.97″～29.92″) (*1) | |
| Reading angle | Pitch:±60° Roll: 360° Skew motion:±60° (*1) | |
| Reading code | 1D: JAN/UPC/EAN, CODE11, CODE39, CODE93, CODE128, ITF(INTERLEAVED 2of5), DISCRETE 2of5, CHINESE 2of5, MATRIX 2of5, CODABAR(NW-7), MSI, GS1 DATABAR OMNIDIRECTIONAL, GS1DATABAR LIMITED, GS1DATABAR EXPENDED 2D: PDF417, MicroPDF417, Datamatrix, QR Code, Micro QR Code, Aztec, RSS, Composite, TLC-39, MaxiCode/Postal: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX) | |
| Light sources | RED LED | |
| Battery | Battery Capacity | Built-in rechargeable lithium-ion battery 700mAh |
| Continuous operation time | 20,000 times（*2） | |
| Power Source | Magconn cable、DC Power cable（*3） | |
| Charging time | About 2 hours (Built-in battery）(*4) | |
| Key input | 2 trigger key | |
| Communication | Interface | MFi on Lightning (*5) |
| Appearance | Dimensions(W)×(D)×(H) | 63.7×9.7×117.2mm |
| Weight(with Battery) | About 70g | |
| Material | PC | |
| Case color | White | |
| LED | Non-blinking Blue LED: Connected with device (*6). Blinking Blue LED: Reading Barcode. Non-blinking Red LED: Battery is charging. Faint Red LED: Battery is fully charged |
|
| Environment | Operating environment | -10～45℃, 20～85 % RH（Charge at 0 ℃ or more) |
| Storage environment | -20～60℃, 10～95％RH | |
| IP Rating | IP54 compliance | |
| Anti-drop | (Six-sided * 4 edge, once each) 1.5m (*7) | |
| Certificate | Apple MFi / FCC / CE | |
| Requirments | Devices | iPhone 6/6 Plus/6S/6S Plus/5/5S/SE, iPod touch 5/6 gen, iPad mini 1/2/3/4, iPad Air 1/2 (*8) |
| OS | iOS8.0 or later (except iOS9.2.x) | |
| Bundled items | Magconn cable / Earphone extension cable / Installation instructions /manual | |
*1 May depend on barcode type.
*2 Continuous operation time was tested with iPhone’s default brightness setting.
*3 Standard iPhone 1A charger is strongly recommended to be used when using Magconn cable.
*4 iPhone and AsReader batteries will charge simultaneously. iPhone and AsReader batteries will be recharged in 3.5 hrs and 2 hrs respectively in simultaneous recharging mode.
*5 SDK is required and available for free download. Please contact us.
*6 Blue LED will turn on after iPhone/iPod is connected. LED will turn off after the reading the first tag.
*7 iPhone screen could be broken, depending on the drop angle.
*8 It depends on the case, Please contact us for case availabilities.
Best price for the best 2D iPhone barcode scanners in Dubai, Africa.